share a dsl connection on your s60 phone, internet via bluetooth

**coding** · #1 (**permalink**) 3rd February 2009, 06:49

JUST FOLLOW THOSE STAPES.100% WORKING on N70.
I THINK IT WILL WORK ON ANY NOKIA s60 PHONE.

DOWNLOAD mRouter :

Code:

[hide]http://www.wgcompex.com/Downloads/mRouter3Installer.exe

DOWNLOAD GNUBOX DEPENDING OF YOUR PHONE MODEL HERE

Code:

http://gnubox.dnsalias.org/gnubox

[/hide]

Configuring m-Router
Let’s first configure m-Router to accept incoming. Start the mRouter installation and complete it. If you are using Widcomm drivers, something like this might show up right after the installation process:

clik no if the above screen appear

After the installation, the setup wizard will come, clik Next>

Select your N70 in the device selection screen and clik Next

Uncheck the box where it says “Automatically connect to this device when it is in range” and clik Finish

Now right clik on the m-Router taskbar icon and clik on Advanced Settings

clik on the View button under Additional COM Ports

Select the COM Port used by your Bluetooth device and clik on >> as shown above. In my case the COM Port used is COM5, it may be different in your case.

After setting the COM Port, clik OK

Under connectivity methods, look for Additional COM Ports and expand it to make sure your COM port is there. clik Close
Now that our m-Router is all set, let’s configure Gnubox on the N70.

Gnubox for N70 Configuration
Transfer the file gnubox_N70.sis and follow the regular installation process. Make sure that Bluetooth is turned ON on your PC and N70. Also make sure that your PC and N70 are paired.
Go to Tools -> Settings -> Connection -> Access points . See the image below

Go to Options -> New access point -> Use default settings.

Change the connection name to Bt. Gnubox will not accept any other connection name so make sure you have it set to

Now that you have a connection named Bt, run Gnubox and go to Options -> Install -> Create Records

Dont worry when it says ISP ‘Bt’ not found. Exit Gnubox. This step is very important so make sure you Exit Gnubox.

Now run Gnubox again. This time the screen will look something like below

Go to Options -> 2box Bluetooth -> Serial port

The phone will now search for Bluetooth devices, select you PC and hit OK. The screen should look like below

We are almost done here. Now Go to Options -> Install -> change default AP to set Bt as your default Access Point. Then go to Options -> Debug -> Bring up IF

That’s all, the phone will connect to your PC via Bluetooth and show a message saying “Connection Open” (couldn’t take a screenshot of that, it goes away too quick). Now you can browse the internet, chat with friends and do pretty much anything that you can do over GPRS.
Alright now, so far I have discussed the ways to get online and gave a detailed description on how to get connected via Bluetooth using PC’s internet connection. Now I will move on to applications.
Web Browsing
By default, N70 comes with Opera version 8.01. The latest version is 8.50 so make sure you grab the latest version of Opera Mobile. All the N70 users are entitled to download Opera Mobile for free so dont hesitate and get it from here. To use Opera with the Bluetooth connection, go to Options -> Settings -> General (change the Tabs) and change the Connection to “Use Default” and Default Connection to “Bt”.
There are other browsers that one can use like NetFront but Opera is by far the best browser for mobile phones and it’s free for N70.
__________________

**coding** · #2 (**permalink**) 3rd February 2009, 06:52

thank you Final guys

chiquiscoca · #3 (**permalink**) 17th March 2009, 01:14

thanks

ajaydd · #4 (**permalink**) 17th March 2009, 12:46

thanks

suresh123 · #5 (**permalink**) 19th March 2009, 08:26

thanxxxxxxxxx

dangalli · #6 (**permalink**) 19th March 2009, 20:44

Quote:

Originally Posted by coding

JUST FOLLOW THOSE STAPES.100% WORKING on N70.
I THINK IT WILL WORK ON ANY NOKIA s60 PHONE.

DOWNLOAD mRouter :

[code]hidden content may not be quoted

Configuring m-Router
Let’s first configure m-Router to accept incoming. Start the mRouter installation and complete it. If you are using Widcomm drivers, something like this might show up right after the installation process:

clik no if the above screen appear

After the installation, the setup wizard will come, clik Next>

Select your N70 in the device selection screen and clik Next

Uncheck the box where it says “Automatically connect to this device when it is in range” and clik Finish

Now right clik on the m-Router taskbar icon and clik on Advanced Settings

clik on the View button under Additional COM Ports

Select the COM Port used by your Bluetooth device and clik on >> as shown above. In my case the COM Port used is COM5, it may be different in your case.

After setting the COM Port, clik OK

Under connectivity methods, look for Additional COM Ports and expand it to make sure your COM port is there. clik Close
Now that our m-Router is all set, let’s configure Gnubox on the N70.

Gnubox for N70 Configuration
Transfer the file gnubox_N70.sis and follow the regular installation process. Make sure that Bluetooth is turned ON on your PC and N70. Also make sure that your PC and N70 are paired.
Go to Tools -> Settings -> Connection -> Access points . See the image below

Go to Options -> New access point -> Use default settings.

Change the connection name to Bt. Gnubox will not accept any other connection name so make sure you have it set to

Now that you have a connection named Bt, run Gnubox and go to Options -> Install -> Create Records

Dont worry when it says ISP ‘Bt’ not found. Exit Gnubox. This step is very important so make sure you Exit Gnubox.

Now run Gnubox again. This time the screen will look something like below

Go to Options -> 2box Bluetooth -> Serial port

The phone will now search for Bluetooth devices, select you PC and hit OK. The screen should look like below

We are almost done here. Now Go to Options -> Install -> change default AP to set Bt as your default Access Point. Then go to Options -> Debug -> Bring up IF

That’s all, the phone will connect to your PC via Bluetooth and show a message saying “Connection Open” (couldn’t take a screenshot of that, it goes away too quick). Now you can browse the internet, chat with friends and do pretty much anything that you can do over GPRS.
Alright now, so far I have discussed the ways to get online and gave a detailed description on how to get connected via Bluetooth using PC’s internet connection. Now I will move on to applications.
Web Browsing
By default, N70 comes with Opera version 8.01. The latest version is 8.50 so make sure you grab the latest version of Opera Mobile. All the N70 users are entitled to download Opera Mobile for free so dont hesitate and get it from here. To use Opera with the Bluetooth connection, go to Options -> Settings -> General (change the Tabs) and change the Connection to “Use Default” and Default Connection to “Bt”.
There are other browsers that one can use like NetFront but Opera is by far the best browser for mobile phones and it’s free for N70.
__________________

thnx

whateva6969 · #7 (**permalink**) 20th March 2009, 08:10

thanks mate

comp3030 · #8 (**permalink**) 23rd March 2009, 19:56

thanx

VickyFrantz9 · #9 (**permalink**) 1st April 2009, 16:57

thanks

raminshayan20 · #10 (**permalink**) 5th April 2009, 17:36

tanx

phoneix · #11 (**permalink**) 10th May 2009, 19:19

bazigar_286 · #12 (**permalink**) 31st May 2009, 18:23

thanx

marodalies · #13 (**permalink**) 4th June 2009, 21:12

thank u very much

taimoor · #14 (**permalink**) 13th June 2009, 18:45

thanks

Anas22 · #15 (**permalink**) 2nd September 2009, 10:24

thx